Industrial products

Imaging frames made by Pero-System are used for the reliable and accurate measuring of objects. Depending on the measurement requirements, they form an imaging curtain or a grid and can be combined in a variety of ways. All systems comprise an object holder and a frame, which is often moved manually on a rail. Depending on the model, the frame has a different clear width. Fig. 1 shows a typical application. During measurement the frame is moved on the rail across the object to be measured. The volume of the object is determined.

Fig. 1: Measuring the volume of a wooden trunk (Table 1, model 351 NT, 352 NT and 2 x 353 NT)

Fig. 2: Measuring the volume of parcels ((above) and Demonstration video (below)

In other applications the frame is moved over objects like packets or parcels. Again, the frame determines the diameters and the volume of the objects. In another configuration, the objects are pushed through the frame by a conveyor belt.

Both options are also available with a rail allowing a vertical movement of the imaging frame. In this option the weight of the frame is balanced so that it hangs quietly in each position.

In a high resolution option (see Fig. 3) an object of circular or elliptical cross section area is placed within the frame, which hangs quietly and determines the circumference of the object every 2 seconds. This option allows to measure the change of the diameter or of the circumference of the object, e.g. due to a temperature change (see Fig. 4). Changes as low as 20 Micrometers are detected.

Fig. 4: Change in circumference of an aluminum tube heated to about 200 °C upon cooling to room temperature

Fig. 3: Measurement of the circumference of an aluminum tube in high resolution (Table 1, model 451 NT, 402 NT, 403 NT)



The following table 1 shows the imaging frames available (column 1). Typical rails and object holders designed for the imaging frames can be found in the same row.

Note that our industrial scanners are not intended for the use as medical devices.

ModelClear WidthCasingWeightResponse TimeRailObject Holder
1001 NT47 cm x 31 cmAluminum3,5 kg70 ms1002 NT1003 NT
401 NT47 cm x 47 cmAluminum5 kg100 ms402 NT403 NT
351 NT47 cm x 47 cmAluminum4,5 kg100 ms352 NT353 NT
451 NT47 cm x 47 cmAluminum4,5 kg2 s402 NT403 NT
1001 M41,5 cm x 31 cmAluminum3,5 kg70 ms1002 M1003 M
401 T47 cm x 47 cmSteel and Aluminum15 kg100 ms402 T403 T
351 S47 cm x 47 cmSteel and Aluminum12 kg100 ms352 S353 S

Imaging frames, rails and object holders

Model 1001 NTModel 401 NT, Model 451 NTModel 351 NT

Imaging frames on demand

Model 1001 MModel 351 SModel 401 T